Skip to content
Smart Programmer
SMART PROGRAMMERDiagnostic tools

FTDI DIAGNOSTICS

FTDI Checker V6

Test FTDI adapter UART at 1M / 2M / 3M baud, loopback, mismatch, timeout and RTS.

Windows x64 · Portable ZIP · Includes ftd2xx.dll and Thai/English guides · 0.27 MB

Download FTDI Checker V6

Getting started

  1. Extract the ZIP and run FT232RL_HighSpeed_Tester_V6.exe.
  2. Close Smart Programmer and other programs using the adapter port.
  3. Disconnect the adapter from the target MCU and wire the documented loopback before testing at 1M / 2M / 3M.

Missing loopback can cause a timeout; this alone does not mean the FTDI adapter is faulty.

Choose the right test

AUTO and TEST CONFIG WRITE temporarily write FT232R EEPROM configuration and attempt to restore it. The config test does not support FT232BL.

RTS controls toggle the physical RTS pin. Stop on RESTORE FAILED and check the original configuration with FT_PROG.

Functional results do not prove chip authenticity or qualify communication with a target MCU.

Existing V6 EXE · Not Windows Authenticode-signed · No Smart Programmer update included.

SHA256

b0051f4353dce78fa4958fe3395f8b40f8ee53a9198c1bb8d675aee5a3496be2